"station" videos at 5min

This episode is primarily focused on the design of the legs. I present several options and show how I create a basic template. At the end, you will see the final test leg. The process of cutting the leg itself will be covered in detail when we cut the final legs out of the bubinga stock.

This video covers my initial impressions and experience with the Earlex Spray Station 5000. To sum up, I thought the Earlex did a darn good job spraying pretty much everything I put in it, including oil-based poly, water-based finishes, lacquer, and latex paint. I would probably recommend purchasing some of the smaller tip sets though, since they will increase performance on the water-based stuff.

Part 2 of Cairo Station for Halo 2 Walkthrough

Part 1 of Cairo Station for Halo 2 Walkthrough

Road Trip! I was originally convinced that the Gadget Station would call for knife hinges. But just for fun I decided to take a trip to my local Woodcraft to see what they might suggest. Well, surprise surprise! I discovered a hinge that I had never noticed before. The Soss Invisible Hinge. I actually like this hinge better and I think it will suit this application perfectly. I hope you enjoy this little review of common hinges with our friend Frank Galloway, at the Chandler, AZ Woodcraft Store.

In this video, I focus on cutting the joinery for the case sides, as well as cutting the square holes for the ebony plugs. I discuss at length various ways of doing both operations and I cover some basic chisel techniques, including how to deal with a very dense wood like bubinga. And you won’t want to miss the public service announcement at the beginning!

For the first time ever, I am using mail-ordered wood. This material came from Bell Forest Products and I was very impressed with the quality. The shipment came in two packs and contained some really nice wide bubinga boards, as well as a piece ebony for the trim and some spalted maple for the doors. I sticker and stack the wood and talk about acclimation, and how it pertains to this particular situation. I talk a little bit about moisture meters as well and finish up by showing my strategy for

Time to embark on our next project: a Gadget Station. Most people have tons of gadgets laying around the house these days, and they all need to be charged. So my goal is to create a wall hanging cabinet that houses the electronics in a safe and organized fashion. An interesting point of interest with this project is that the recipient is the one and only, Leo Laporte (The Tech Guy).

Learn how to beat the Halo 2 Campaign level Cairio, Part 1

Learn How to Beat Splinter Cell: Pandora tomorrow. This video is a walkthrough of the Television Free Indonesia, Jakarta mission played on Hard Difficulty. See how I infiltrate the station and get to the target individual.

Learn how to install a new head unit in your vehicle by showing you how to install the Alpine IVA-W505 multimedia station with GPS, satellite radio, DVD/iPod playback, Bluetooth cellphone integration, and a backup camera.