Hi there we are going to make quick Vibrobot. I got the two motors of the play station to the controller. They have come with on so that when it rotate that cause the controller to vibrate. Attach these together then to black and in this case that to white. This is so that the motor is actually will rotate in the opposite direction. I will take a PP3 connector it does not really matter which of these we have fasten these two, just twist them together on one of the joints, take the black one. Twist out together on the other joint, connected now.
I got some plain Blu-Tack pick a couple of it a bit about a pea size. This is just to keep the wire in apart so that one on one side, one on the other. Again pick up the Blu-Tack about a half, flattened it on to the bottom of one of the motors. One piece and then the other piece flatten up on to the other motor and we can press this firmly under the PP3 Battery. Blu Tacks, separating this wires come close and just put up them back on data plug and we can see the start has been come of press it firmly back on.
There is our vibrobot. It perform on a book like I have here, we can make it move and dance around. This battery is quite weak so it is only turn and quite slowly at the moment but it quite good form. You can try and move the motors about. One good thing about the Blu Tack is that you can move them about try it in different position to see what effect that has. Your idea of putting the motors turn in the opposite ways to try and stop the tack of the motors actually it causing the vibrobot itself to turn and spin around, quite good form. So enjoy yourself. Obviously when you want to stop it, just unplug it.
There you go simple Vibrobot.
Transcription by:
Scribe4you Transcription Services