Boating tutorial series: Secured anchoring

After checking an area, approach the anchoring spot slowly, heading into the wind or current, whichever is stronger. Stop the boat and lower the anchor over the bow, do not throw it. The end of the rope should be attached to the boat before releasing the anchor, let out the anchor line as the boat drifts down wind.

If the wind has too little effect, back the boat very slowly, while letting the line run out freely. Avoid backing too fast which could cause the anchor to bounce along the bottom. When a scope of 5:1 has been let out, wrap the line around the bow cleat and reverse slowly against it, until it becomes taut.


Transcription by: Scribe4you Transcription Services