Steve Watson: If you ever to see a chances to look of anywhere in your house by adding
carpet and you want to do it yourself, it’s very easy and it will use carpet
tile. You can find tiles like this at your local homes supply center and to
install them you need the measuring tape, a straight edge and the utility
knife. And it just goes together that is easily, you don’t need padding
because it’s already attached. And the great thing about the way to go
together as a stainless after your brushing one time you have no idea that
is the same there. Once you’ve cleared the room and clean the floor start
by placing the tiles in one corner of the room. Do the entire mess of the
room then go back and cutting all your corners onto your edges that you
have left.
You may need to cut in around things like hitting vents and fireplaces, all
you do is measure and mark the back of the tile and using your straight
edge is a guide get through there rubber backing with utility knife. Once
you fill in all the tiles the pressure of the walls and the way of the backing
will keeping them place. Then vacuum puts on your back, you’ve got a
brand new carpet room so entire process will take one person about four
hours, two people about two hours you have a good time and at the end of
the day you have a brand new look in your living room. Ready to try this
project click on the go list bottom right here on this page and you get the
shopping list of all the materials you need sent right to your cell phone.
Transcription by:
Scribe4you Transcription Services