No text or picture Add-ons were added yet. How sad!
[Music Playing]
Okay today we are going to be create a high definition audio speaker using just a couple of household items. First things you are going to need here are paper plates some aluminum foil, a little bit of tape and also you are going to need a shinny penny. Now it is important to note that use a shinny penny for this as a coroated penny will increase electrical resistance, which will result poor sound so go ahead and wrapped your aluminum foil over the convex side of your paper late. It is important that the aluminum foil is wrapped around the plate and creating an enclosure for the air that is going to be inside. This will give it a reverberation effect.
[Demo]
After you wrapped a thin foil around the plate, go ahead and set it down, you are going to place the penny somewhere towards the center of your plate.
[Demo]
Now go ahead and put some tape on top of the penny to hold it in place. You are going to need to grab in mini jack cable with some exposed wiring you can take it in old headset or basically anything that has this plug on the end. You are going to make sure it is touching the penny, seal it down with the tape. Once you have done that you can plug it into your system
[Demo]
Once you have made through the connection it is secure. You can go ahead and test it out and you should have results like this.
[Demo]
It is important to note that since we are using only one speaker here the audio will not be quite up the par as you have a 7.1 system or something among those ones. Now what you can do is create multiple plate speakers like this and set them up around your room or your living room and have the full effect that you are looking for and there you have it a high definition speaker for under one dollar. Watch out boss.
Transcription by:
Scribe4you Transcription Services