To this, to make sure that that line is still there. We are set up. Let us go back to our blog so if you click on activate this plug in and you get this message, that is how you try to do it, you copy that, you go across the C panel, you go to the cron job and set that up, you paste that in. Most of the time, most host, you might have a problem, you click on activate and it will just say, “plug in activated” which obviously is a lot less hassle. Then you need to go to the options and csp data feed. This is the page that you will then see once it is refreshes. Now the first of it is for changing of the frequency of that cron job. So if we are doing this on one way with manually updated, it is not going to work so we cannot check the frequency from here. We need to get back in the C panel to do it. If we do it on the up blog, that is on the host where it can be automatically done, we change this frequency in 5 minutes to 50 which could be my preference and simply click on the update frequency and it should take care of that voice automatically.
However, it does depend on your host. I have about a dozen different host, not trying this to a few different hosts. On a couple of them, what I found was happening was it was putting a bit hard into that first setting where it should just be a number. So it would actually put in like it sort of all rest back. When we have this series of stars in the first field, I put in prints in 53 or 56, whatever. It was putting in all of that, we do not want back so you may want to go, if no post turn off within the first hour or two, go into your C panel go to the cron jobs and just check and make sure that has a number in there that you are happy with.
The next bit is actually importing the date feeds themselves. That is very simple. The most important bit here is do not use the test code direct one unless you are using the test code direct data V. Neil has obviously got some different template set up. One them specifically of test code direct, the other one is content which is general, which will work with most data feeds.
If you want to play around with the templates, you can go to templates editor and make changes to them. However, I found using the standard content one will work very well. So all you need to do now is click on browse, it will take you through your local hard disk and you just need to go to where you save the CSP file if you remember the last video, we save this as a name of the blogplus.csp, so simply click on that, choose open and then next to do is click on import. Now Neil does say to choose a different user name. You could put keywords, have a username set up with your keywords, it could be useful. I would also recommend leaving comments status as close.
I also recommend not taking this until you run it a few times and you are happy that you have got the data bits format correctly. So I am going to click on import, that may take a little while to run because this 400 dot in here, it is already most of the way there. If you see at the bottom here, it tells you how many items are remaining. This will depend on the speed of your host, the speed of the server, the speed of your internet connection, things like that. If you got a list of 20-30 thousand, it is going to take awhile 5 or 10 minutes at least. But that is before it is done, so we can see the cash grease that we have got, speak up the name and description. I guess with the cash grease, that are going to be imported or set up for us and if we scroll down, we can see the different post that are going to appear. Each of this is a separate post or with different items and all of them have a link which has my for the ID embedded so if someone clicks on that in the blog post, and goes through too much in advice, I am going to make some money which we was like.
So all we need to do is scroll back up and click on approve, again it will take a moment of this, I am going pause while it goes with the approval. That literally took about 10 to 15 seconds, there is any 546 post in there so it is very quick, so that is done, 7 cash grease, 546 post, that is going to keep you going for that long on this blog, that is the information imported. Now if I got this set up for 50 minutes for checking purpose so there is not going to be anything appearing on here yet, there will be like drawn, so what I am going to do instead is in good all purchase tradition, here is one I prepared area. This is another one of my sites and this has got some data feeds that are also baby, family, kiddy related stuff.
And you can see that the post have been going automatically for me for the last I set this up last night or the night before and I think there is something like 60 or 70 posts on here already so that is how it works. We have got the blog post on there, you can see a picture, the description, there is a link that would take this trick to emerge. If I click on this, it actually take us through this institute and here we go, if someone then click on empty card and bolt this, I would make a commission. How easy is that and all from free content.
Neil’s script is very good. If you want to learn more, go to blogtactics.com. Go to the page says, “Indexed in Google in three days.” Order search on it and you will find more information about Neil’s script.
Thank you very much.
Transcription by:
Scribe4you Transcription Services