All right folks, here is an idea for you. If you want all disco or if you want to saw of organizer your own dance night etc, you have got DJ setup index all ready working. But you need some lighting work behind you.
Now then, of course if you buy light trusting rigs the customer. Now then, just think about these first few pictures that you might scratching your head up to begin with both. Either is clear as mod very shortly. All right, couple of T bass, I daily it seems so high.
Now eventually you will want the T bass over head height. I should explain in a minute. Now then the legs of the TBA, you find quite often 99% of the time, three legs. Make sure the legs facing each other unless you pool. All right now just release pictures in mind because you will see exactly what I am coming from when I put into this practice very shortly.
Now then TBA often you have a couple holds in the TBA this is where you can attach your likes. Well you got G clap and you can fix it of both through that attach to a G clap and there your likes. Try to make sure though, if you can in your aluminum pool to have a hold, this is the exactly the same position as a whole in the TBA so you can attach a BA through that making sure it us totally secure. Okay, that is very important.
All right now lastly, a most importantly watch how much weight you put on it. Be careful do not put too much weight on this. All right now then, again this is a life so, this is going to expends not. Right here we go, there is TBA, now then as you can see here, there is the aluminum pool. I fix the aluminum pool through one side of the TBA if we have a look there is the TBA, there is the leg. It goes down, it follows the line of the floor pass Eli’s dancing matt to the other one up and across unless the other TBA.
Now then, can you see the whole idea there? All right, I have not got into the touch through that, but normally you would have a bar through that at the top to secure it perfectly.
Now there is a general idea and I think about that logically. It saves you an absolute forge you. If I move the camera back, now admittedly that is quite a distance. There is probably about 12 foot there. But use your head, if you could have some think of that distance, do not stop putting tons and tons in the middle because all it happen, it would bend an old fold down. Couple of pinspot, couple twisters on that is perfect. But think about it, if have got your DJ setup right in the middle there and you got that above you, now a TBA now can cause you 35 or 40 pounds in the UK. Pieces of aluminum like that will case you say ten. Now you get yourself a very, very inexpensive setup to go right behind you. Believe me, I have used that many time and once the lights on and the smoke--no one knows at all what you have got behind you. Just along as you stick to the principal, the pictures I have shown you, make sure those legs a facing each other first ability. So that is a little bit tips for you. I hope I will be help, once again practice and enjoy. Take it easy.
Transcription by:
Scribe4you Transcription Services