No text or picture Add-ons were added yet. How sad!
Right, to make an earring you need a head pin,
A smaller bead but the bigger bead falling off the head pin,
Bead of your chose and in this case a tock whiff nugget,
An ear wire,
A pair of round nose plies,
And a pair of cutters okay first of all, we start by treading the smaller bit on to the head pin,
Like so,
And then we thread the tock whiff nugget on to the head pin. Taking the round nose pliers about half way up, we want to bend the end of the head pin over to create a 90-degree angle. And then, twisting the round nose pliers up, you want to bring it back over on it self so starts to form a loop and then twist it all the way back on it self to form a complete loop okay?
So this point, we want to try to put the ear wire,
Thread it to it like that,
Like so, and we want to grab the loop and twist the remaining wire around the neck.
Now, this is neatly as possible for professional finish.
Cutting the excess wire off,
And there we have a pretty head pin with ear wire.
Transcription by:
Scribe4you Transcription Services