Here, in this particular video we are going to be reading over the shooting tips for both SLR, digital -- talking about digital cameras, digital SLRs, Single Lens Reflex and point-and-shoot cameras and some of these may sound basic if you were already been taking pictures on a digital camera or a regular camera, but keep in mind that these are some pretty basic tips that you would hand to some one who isn't used to digital photography or photography in general. Number one, focus and then you shoot, how many functions does the Picture Taker button have? One taking a photo, two focus activating and three, entering and selecting. Share that with your friends. So before jamming on the button, press the button halfway down on the camera, it will take a second to show you if it's in focus and then most cameras will even show you where it's focusing in on and then press the button all the way down.
So remember, point halfway, then all the way, that's the way it works. Number two, learn to set your white balance. White balancing helps your camera capture true life colors or capture creative colors. It must be set manually in every location that has more than one light source, like shooting in a house with the lights in the room and the sunlight from a window. Manual light balance is a must when you shooting without a flash. You choose the camera white balance to get a better understanding of how your camera sees the world. After taking pictures with the manual white balance, don't forget to set your white balance to auto, some people forget their manual. So a day later they take a few pictures and then realize that something doesn't look right. Also if you will ever have to pull the camera out to take a quick shot, it will already be in auto and then you will have to waste time switching and missing the shot.
Learn to set your light meter position. Ever taking a picture in it was too bright or too dark, by default the camera is set to multimeter mode, so taking it, if taking a picture of a person wearing a lots of white or standing by something bright, the picture will turn out dark or if a person is wearing a lots of black or standing in a dark area the face maybe too bright. Most cameras can switch to a center point meter, when switched to center point, point the center mark at the person's face, press the button halfway, the camera will set the brightness and focus and then they move the camera into a position, you want the person to be in the picture. Don't make the mistake of pointing the center point to a person's face and taking the pictures, those photos look bad looks bad, but remember, when you press the button halfway down, the camera locks all the settings, so you can move the frame around and again, this is talking about light metering switching to center point mode.
Lock your ISO, ISO is the camera's sensitivity. This is the process that takes place after the picture is taken, digitally brightening some of the pixels or all the pixels. So, the higher the number, the sensitivity, the worst quality you may -- will possibly get. Although you can get a brighter picture with a higher sensitivity, a higher ISO, the picture will come out grainy and noisy. So, by locking the ISO lower, the camera will have to use other options to get the picture brighter. Experiment with it and learn more about ISO, it will really help you out. So again, the lower the ISO, the more steady you are going to have to hold your camera, but then, you just got to let in more light mode in order to take the picture, but the image will come out less grainy., less what they call noisy. Use force-flash outside, this is a big one. Some cameras fire the flash no matter what and others only get it when it's darker.
I don't think there's a camera that does not have a force-flash setting, usually represented by a lightening symbol without an a by force-flash.
Transcription by:
Scribe4you Transcription Services