How convert your bath tab

Let us remove any existing water it may have in the shower valve itself. What we are doing here is I am just giving you a closer view of the tub or shower valve stems, what you may see once you remove your handles.

Okay, now we are here on the back side of the tub or shower valve, this is what it is looks like, this is what you will see once you removes any wall or any pound that has to be remove from the back side. Look just fairly a little different but anyway we are going to do here is we are going to disconnect the unions that connecting the tub or shower valve to the hot and cold water. Okay, a little more, let us see that in tile.

And what will we do here is one push it up to that piece, so be careful. So that you do not damage the “O” ring that is inside, so do not force it. It should go fairly easy. And what I would like to do is turn it on this side to where I can get to the locking rings and screw and tighten it. And once it is tight, I just take that and turn it into place, and there.


Transcription by: Scribe4you Transcription Services