How to adjust your Rubiks 2x2x2 ice cube
Okay you are probably wondering how I have my 2 x 2 to do this, this and this working almost like two revolutions, when I sleek it right? There is two adjustment screws. One is right here on the blue face, if you see that blotted dot? You take this little cap off like so and there is your screw. You could adjust that, when I found out you can do that and there is a screw on the inside of one of the blue pieces where the inside mechanism does not, how can I see it. It does not come off on the pieces, it is actually screwed to one of the piece but if you loosen that, there is tiny bit, I am talking like less a half a turn. It will give you this result and the cube will still be awesome.
I did notice though that my cube started popping, beyond the ice cube can pop when I made it too loose so do not make it too loose. Just go ahead and adjust those screws, you want them just to be a tiny, tiny bit looser than they are already are. I am talking about maybe like, quarter, like less than a quarter turn. You just like barely move it and you will have an awesome ice cube. It is actually pretty fast, I should be tightening myself a little bit.
There you go, I hope that helps that one guy who is asking me some questions about the two 2 x 2 so, it will work.
That is short and sweet, no music.
Please check out my other videos. Out!!!
Thank you for watching. Please rate and subscribe!
Okay bye.
Transcription by:
Scribe4you Transcription Services