How to Build a Pond - Preparing the Hole

Alright what we have here, we’ve got an obvious we’ve got a big hole in the ground. we’re getting ready to install a pond. And what we’ve done, we dug it out in a couple different levels.

The first level, up here what you going to see all the way around the pond is for your ___00:16. Then we’ve came down about a foot after your foot and we’ve got another ledge here. And this is going to be for the ___00:24. most marks your going to go until 10-12 excess water and that is what this ledge is here for. And we’ve choose to put it all the way around, that way in he future, If you want to add a plug to any part of the plan we can without any major work.

Then you’ve got the next level right down here. This level here is your shallow end. You’ll notice that the whole slopes all the way down, goes down in the deep and all the way down to here. Okay and that is for waste collection. Your skimmers at this end where pumps is going to be held your filters is going to go on this mount the dirt over here and it’s going to re-circulate as debris and particles they will start settle on to the bottom and they’re all going to make their way to towards it’s deepest part here and it will be all that amount for easy access.


Transcription by: Scribe4you Transcription Services