Everybody, on this episode.
(Music Playing)
We are going to create.
(Music Playing)
A motorcycle, not just a motorcycle, I call it Kawasaki Ninja Motorcycle. This is a really cool design. First off, you need a lime green 260, inflate it leaving about a six inch tail. Now, this is kind of tricky, so stay with me. We are going to do small bubbles about one inch. Tie off, twist them both with the knot and secure the knot by rolling the knot between two bubbles. Now, we create a small bubble that is a pinch twist.
Now, we create a series of bubble which include two small half inch bubbles. One, about one and a half two inch bubble followed by two small half inch bubbles which will create the handle bar and headlight for our motorcycle. Now, take the second bubble and fourth bubble and pinch twist them, like so. Now, we have about a two inches bubble followed by two, one inch bubbles that we will connect to the beginning of the two inch bubble, like so.
And then we will make one more two inches bubble that is the same size exactly as second one and we will roll through. This is a kind of way and you go back with two bubbles and you roll one bubble through the two others that will lock it into place. You should have this by now.
Now, we will create the back part of the motorcycle. This part has two same size bubbles as the first ones which is about one inch and a small pinch twist that will create the sit. Now, we do not need the rest of the balloon, cut it using scissors and deflate it. Tie it off and this will create the base for our motorcycle.
Now, to create the wheels and the fuel tank, we are going to use a black 260Q. We will tie off the tip of the balloon at the junction of these balloons. At the front of the balloons we will use the nozzle to twist it around, take the black balloon and roll it around the first two bubbles. I usually measure the exact size to create a circle around then I twist off the bubble then I secure this around the balloon. This creates the front wheel of our motorcycle.
Now, we continue by placing the black balloon between the two, two inches bubbles has squeezing it a bit and making about the same size bubble as the two first ones and twist it around the back part of the motorcycle. This will create a cool looking fuel tank.
Now, we are going to do exactly the same thing as we did for the first wheel. We will rotate the black balloon around the two wheels. Now, this is a different technique. We are going to twist everything together to lock the last wheel. Now, this could be the end but what I like to do is cut off the excess, deflate the rest of the balloon, and tie it off to get about five, six inches balloon really soft. Twist the rest of the balloon.
Now, I am going to do the handles and make it really small like maybe half inch bubble and I twist that on the pinch twist we used for the handles, like so. I twist the balloon around over the second pinch twist. Deflate the end of the balloon and match the same size of this bubble to get the second handle and then you tie it off. You could remove the excess. Now, you have Kawasaki Ninja Motorcycle, very cool, guys love it, and girls too. You can have the small logo here for like or just make sure whoever you give to has a license. Drive safely.
Transcription by:
Scribe4you Transcription Services