How to Hold a Body Hammer
Male Speaker: Demonstrating how to use the hammer. The pick, and this is the head of the hammer. The proper way of holding it is like this with your forefingers this way and your thumb up here, hold just like that. When you hit it, you want to make sure that you hit it squarely. You want to make sure that you hit it with the force that you don't want to hit it to where you miss and you end up hitting it, say, like this, because what you can end up doing is probably causing more dense.
You want to make sure you hit it squarely and you want to get square and flat, just like. You want to swing with the wrist, not so much the arm or the shoulder. And when you do, you want to, like this, alright! And the pick, this is used mainly for smaller indentations or borders, so you could come in -- this one is used just for more of hanging in bigger areas. You never want to strike a hammer with another hammer or, because it can cause problems, you can chip it.
How to Dress a Body Hammer
Male Speaker: Well, I'm going to show you how to dress the hammer in a lot of angle, how many of you done. Quite going in every direction you can. And after you've got it all done, you want to run out the edges too, but you don't want to have sharp edges when you're using on panel. I think you've done with that, filing with the file, you can use file a bit again just to polish that out and gives a nice finish. There we go.
Transcription by:
Scribe4you Transcription Services