No text or picture Add-ons were added yet. How sad!
Add-on kits are a great way to customize your specific watering needs. DripWorks offers five unique add-on kits to combine with your heart kit to distribute water your plants.
The Mini-Jet add-on kit is a set of ten sprayers that offer a 180 degree watering pattern. The Mini-Jets are ideal for light watering over smaller areas, such as flower beds and small planter boxes.
Each Mini-Jet sprays water in a 3.5 foot radius providing thirteen gallons of water per hour. This kit includes ten Mini-Jets and ten easy stakes. Each stake comes with a 3 foot run of quarter-inch tubing to allow for a wide range of flexibility in placement.
To determine where your Mini-Jet should go, place the easy stakes in the ground where you feel it is necessary for proper water coverage. Once the stakes are inserted, run the quarter-inch tube connected to the stake back towards the mainline tubing.
To connect the stakes to the mainline tubing, start by making a hole in the mainline tubing where desired with the yellow punch by using a twisting motion. To fix a hole made in the wrong location, simply use a goof plug to repair the mistake.
Take the quarter-inch tube from the stake with the transfer barb already inserted and place it into the mainline tubing. Remember to separate each tube by 3.5 feet to 4 feet.
Finally, take the Mini-Jet sprayers and install them into the quarter-inch tubing on the top of each stake. The Mini-Jet sprayers will thread into the tubing. This can be done by hand or using the hex-shaped hole on the opposite end of the yellow punch.
When all the Mini-Jets are inserted onto the ends of the stakes, turn your faucet on for 15-20 minutes and inspect that all the Mini-Jets are creating the necessary watering pattern and the area is being entirely covered.
If you have any further questions about our products or installing your drip system, please contact us at (707) 459-6323 or via email to tech@dripworksusa.com.
Transcription by:
Scribe4you Transcription Services