How to Install Low Voltage Deck Lighting - Pt 4

Okay. Now here is where we drill up into that hole that we did just right here.

We are going to drill in right here and then up at an angle, so that you can jump right into that hole right there and you'll kind of feel it hit that hole. And as long as you have lined it up right and it'll go right in there. You'll be able to tell. Don't drill too far because you don't want to go out the backside.

There is one more side and there we go. And there you go. And we'll take a blower to blow it out and get it all ready. Every once in a while, there are some extra shards of wood in there, and you need to take your auger a bit and go down from the inside and get it all cleaned out, so it's nice and smooth to run your wires through.


Transcription by: Scribe4you Transcription Services