How to Install a Kitchen Faucet Video

By: Guest 3 months ago

As all your videos they are well produced and thought out. I like the way you explained why steps should not be skipped and showed the results of flushing out the water line. Also the tools needed and how they are beneficial. For first timers a good teacher is a must! (and you are a good instructor!)

Reply to this Comment

How to Install a Kitchen Faucet

Installing a kitchen faucet is not as hard as you might think. Hi I am Tim Carter from AskTheBuilder.com. Into the next several minutes, I am going to show you how easy it really is to install a gorgeous faucet like this right here in this granite countertop. The first thing to do is to read the printed instructions from the manufacturer. Do not skip this important step. The joint between the faucet and the countertop or sink surface must be sealed. Some faucets come with a built-in rubber seal. If the faucet you use does not have a seal, then use a ring of plumber's putty. Use the large knots to draw the faucet tight to the countertop. It is best to use a special plumbing basin wrench for this job. The design of the basin wrench allows you to reach the tight space between the sink and the cabinet. The swivel head allows you to use the wrench to tighten knots or loosen them. The next step is to connect the water supply to the faucet. I prefer to use flexible supply lines that have a braided stainless steel covering. This acts like armor that prevents the supply lines from bursting. This supply lines come in various lengths, but I only need 12-inch ones for my job. Notice how the ends of the supply line have different sized knots. The larger knot connects to the brass threads at the valve outlet. The smaller knot is a 3/8 inch compression knot. This is a common size for shut-off valves or fittings that solder the copper pipe. It is time to install the flexible supply lines between the copper water line and the actual faucet, but it is important to flush out the water line before we actually make the connections. Why? There can be small pieces of copper shavings, there can be sediments in the water pipe or some of the gooey flocks left over from soldering and you do not want that material to get up into the faucet. The basin wrench is needed to connect the supply line to the faucet outlet. A regular open-ended wrench can be used to connect the supply line to the shut off valve or the threaded fitting. I have got that last supply line tight. This faucet comes with the veggie spray and we need to actually install it right now before we turn on the faucet. If you make that mistake water is going to squirt out the bottom of the faucet and flood the cabinet. So do not turn on the water yet up above. The first step is to attach the decorative ring to the top of the countertop. Install the large knot and washer underneath the countertop. Be sure not to overtighten plastic knots. Feed the flexible hose of the veggie spray through the decorative ring. Apply thread joint compound to the end of the threaded supply tube that feeds water from the faucet to the veggie spray. Tighten the knot on the end of the flexible hose to complete this part of the job. Okay, we are finished, but we are going to test it right now. Now, you are going to wonder why do I have this bucket here, here is why? If you noticed when we are installing the faucet there were no drain pipes in the way. It is always easier to install the faucet before you install the drain pipes they just get in the way. So now, I am going to run the water and see if we get some out of this faucet. Check that out, and even the veggie spray works. I told you, installing a kitchen faucet is easy. You can do it just take your time. If you want to discover more home improvement tips, go to AskTheBuilder.com.

Ask the Builder - Official Website

The Home Improvement Resource

http://www.askthebuilder.com

Featured Links:

wikiHow Home and Garden

Find more articles on home improvement, DIY repairs and projects for home and garden on wikiHow.

http://www.wikihow.com/Category:Home-and-Garden

Types of Kitchen Faucets

Have you ever seen that Kohler commercial where a woman tells her designer that she wants him to design her house around a faucet? You may have laughed, and said ???Yeah, right! No one can do that!??? Now you can ??? especially in the kitchen. Faucet

http://www.articlesbase.com/kitchens-articles/types-of-kitchen-faucets-558373.html/9461024403

Installing a kitchen faucet is not as hard as you might think.

Hi I am Tim Carter from AskTheBuilder.com.

Into the next several minutes, I am going to show you how easy it really is to install a gorgeous faucet like this right here in this granite countertop.

The first thing to do is to read the printed instructions from the manufacturer. Do not skip this important step. The joint between the faucet and the countertop or sink surface must be sealed. Some faucets come with a built-in rubber seal. If the faucet you use does not have a seal, then use a ring of plumber's putty. Use the large knots to draw the faucet tight to the countertop. It is best to use a special plumbing basin wrench for this job.

The design of the basin wrench allows you to reach the tight space between the sink and the cabinet. The swivel head allows you to use the wrench to tighten knots or loosen them.

The next step is to connect the water supply to the faucet. I prefer to use flexible supply lines that have a braided stainless steel covering. This acts like armor that prevents the supply lines from bursting. This supply lines come in various lengths, but I only need 12-inch ones for my job.

Notice how the ends of the supply line have different sized knots. The larger knot connects to the brass threads at the valve outlet. The smaller knot is a 3/8 inch compression knot. This is a common size for shut-off valves or fittings that solder the copper pipe.

It is time to install the flexible supply lines between the copper water line and the actual faucet, but it is important to flush out the water line before we actually make the connections. Why? There can be small pieces of copper shavings, there can be sediments in the water pipe or some of the gooey flocks left over from soldering and you do not want that material to get up into the faucet.

The basin wrench is needed to connect the supply line to the faucet outlet. A regular open-ended wrench can be used to connect the supply line to the shut off valve or the threaded fitting.

I have got that last supply line tight. This faucet comes with the veggie spray and we need to actually install it right now before we turn on the faucet. If you make that mistake water is going to squirt out the bottom of the faucet and flood the cabinet. So do not turn on the water yet up above.

The first step is to attach the decorative ring to the top of the countertop. Install the large knot and washer underneath the countertop. Be sure not to overtighten plastic knots. Feed the flexible hose of the veggie spray through the decorative ring. Apply thread joint compound to the end of the threaded supply tube that feeds water from the faucet to the veggie spray. Tighten the knot on the end of the flexible hose to complete this part of the job.

Okay, we are finished, but we are going to test it right now. Now, you are going to wonder why do I have this bucket here, here is why? If you noticed when we are installing the faucet there were no drain pipes in the way. It is always easier to install the faucet before you install the drain pipes they just get in the way.

So now, I am going to run the water and see if we get some out of this faucet.

Check that out, and even the veggie spray works.

I told you, installing a kitchen faucet is easy. You can do it just take your time.

If you want to discover more home improvement tips, go to AskTheBuilder.com.

Transcription by: Scribe4you Transcription Services