No text or picture Add-ons were added yet. How sad!
No Links were listed yet. Go ahead and share!
I am Chris Duke and this is Truckblog.TV.
Putting in the video pickup truck is always been a problem especially if it is lifted. If the tires step method which is great unless you got a lifted truck bigger all tires the is a bumpers step which cause a lot of stress on your knee as tail gate method which is downright sloppy. Ford is introduce to solution in a 2008 super duty and the all nine F150 with the integrated toll gates steps that foots down allows you easily to get in to the pick truck which is great unless you can allow your toll gate for example when your are towing. To solve this problem AMP Research introduces the bed step which attached to the frame on the driver side bumper.
Today on Truckblog.tv I am going to show you how to install one of this in six easy steps. For this installation you are going to need safety goggles, a 17 mm socket, a 21 mm socket, socket range, and alloy wrench and of course an ice cold beer. Let us get started.
Everything you get this knots off for the simple socker and stick again Ford got and pretty good. So grab a breaker of bar a 13/16” socket. Buster liters. Then you can go with this socket. Next install the upper mount under the linkage using the required hardware. Then to work at a 33 foot pound using a 17 mm socket. Now side the upper mount over the factories stud using these stock knots and to work to 59 foot pounds. Install the step pad under the linkage using the two provided screws. Next adjust the foot pads side-to-side to allow for foot access. This one enough clear to the bumper before your foot to get up there and then tightened those screws with the alloy range. And finally, here is the truck block tip they do not mentioned in the manual should be step number seven it says it is nasty push sticker right you can take that off. And then do that stick in on there. She is a sticker itself to get off nice and clean.
Bed Step Test Drive
Now you can see the bedstep for AMP Research makes getting in the video truck of whole lot easier. But that is for this episode of truckblog.TV. For more information on AMP Research BedStep www.amp-research.com is product is good at amp-reasearch.com and for more f our videos go to www.truckblog.tv. And please be sure to subscribed your pad cast on apple itunes.
End three..
End two…
End one…
It is the tire method which is air blog. Beer blog. Now Ford is introduced to solution and their OH Superduty pick up truck. Attaches the frame underneath driver’s Jason Coe was here.
The installation time 20 minutes not for us school of a one easy tools required safety goggles, 17 mm socket, 21 mm socket wrath at wrench extension 3/16 alloy wrench. And really cool for foods You know Jason you really to work me off today. That was awkward.
Transcription by:
Scribe4you Transcription Services