Slame: Hi, welcome to a new tutorial with modmymachine.com and aqua-computer-berlin-de. Today I am going to show you how to install a 360 radiator inside a case if you already cut out the hole for it. So we finally mounted already plate, we will now take a radiator, this is a Aplux Probe 360, we also have the Aplux 360 XT and we got the Aplux AO which is not available any more as a triple radiator but it doesn't matter if it's a triple, double or single its always the same. So we will take AirStream fans today, you can use any fan you like and it doesn't matter, its just necessary that its 120 millimeters. So just put them on top then get them in, put the screws for and that's it, dead easy. So we will put it like this I will show you in a second, a very important thing is if you are going to mount it you get supplied with plaint from us, three different kinds of screws that's M310, M330 and M335. So if you are going to install an Aplux probe or Aplux XT with fans always use M330 millimeter screws. If you are going to use the M335 millimeter screws you are going to screwed up the radiator, so you destroy it, never use the M335 millimeters, only use it for that Aplux AO. So Aplux Probe, XT M330 millimeter screws. The small one is just if you don't use any fan.
So right now we are going to start to install it and then we will have a look, okay. Careful place all fans on the radiator. Place radiator under the plate and apply one screw first. Apply all other screws. Important notice, only tighten screws until they slightly touch the plate. So can you find that they finished installing the 360 radiator triple radiator for free 120 millimeter fans, with the AirStream fans we have available in our shop. Many people ask it is it better to install the fans blowing out of the case or blowing in, so I will recommend blowing out because you have internal projections hot air always gets up, goes up. So the best thing is to support it, get the hot air out, you can use the other fans inside of the case to get fresh air in and to get the hot air out of the case. So in terms won't differ that much if you use it blowing in on the radiator tanks or hot tanks so get the hot air out. So see you next time, I hope you liked the tutorial of installing a triple radiator of aqua-computer-berlin-de and of modmymachine.com, stay tuned for the next tutorial to see you.
Transcription by:
Scribe4you Transcription Services