Hey, here is a video to all you people who don’t believe that I shot the Pop can with this. Okay here is the balloon shooter and here is the home made lead I made, into the balloon shooter and there you go, that is where it went in and that is where it came out. And if you still don’t believe me, I am going to shoot the bottom of it with that balloon shooter and the home made lead. There you go, right through the bottom. And there is the lead. So now you can’t say you don’t believe me. Okay, if you are ever wondering how to make the home made lead. All you need is a block of wood, a drill with a one quarter inch drill bit and a hot soldering iron. Or you can also use a drill press which even works better. Okay, first what you have to do is drill a whole about an eighth of an inch deep. Make sure it is not too deep or else your lead won’t turn out circular. And then, after that get your solder, oh yes, you also need solder of course to make the lead, and all you do is, you take your soldering iron and you melt the lead into the little whole you just drilled and kind of shape it around a bit until it is circular. And you can obviously drill more than one hole like I did here and made tons of lead. So just wait like that, maybe a few seconds for that to dry. If you want it to dry quicker you can always pour water on it. And once it is dry, you get any type of screwdriver that will wedge it out and you just pull it out and there you go. Your very own home made lead.
Transcription by:
Scribe4you Transcription Services