Here how to make a little pill box using recycled items from around the house.
Take a old soda bottle and cut off the little O-ring and discard it. Now, using a hack saw cut off the base of what will be the box, where the thread ends are.
File that down, so its nice and smooth, you could use some files and sandpaper or you can just use a grinder.
Once, that is done take the cap and cut off the little lip around the cap using a good pair of scissors. It should come off pretty easily and it will make it easier to open the box once it is done.
File down the caps so it is smooth too and take a piece of parchment paper and set the nickel on top, and then set the base of the box on top of that.
Using your hot glue gun put a dab the same as the shape of the Hershey’s kiss but with a little bit smaller right in the middle.
Now, if you have an old iron, you can set all of this on top of it and put on some vice grips and let it sit for a half hour while the hot glue melts evenly.
Once, its done you have a nice little pill box, you can carry around in your pocket.
Transcription by:
Scribe4you Transcription Services