Mounting a Graphic Card Cooler
Slame: Hello welcome to new tutorial with aqua-computer-berlin.com and modmymachine.com. Today I'm going to show you how to supply a graphic card from Club 3D 8800 GTS with 320 mega bytes with a graphic card coolant aqua-computer and aqua graphics G80.
First of all, we are going to take a look at what's inside the package and then we are going to start. So I am going
First of all, we take off all the screws. Don't throw them away we - all the coolant. In the middle just take off the big ones, not the small ones. To take off the cooler you need also to mount these two screws on the backside of the card because the cooler is mounted. You're really careful when taking off the cooler because the paste stucks on it. Take off the fan and that's it. Also take off all the pads all the thermal pads left here. So just take them off and put them on the original cooler. We're going to clean the GPU right now to get rid off all the thermal grease. And right now we are going to apply thermal grease arctic silver on the GPU on the RAM and on the additional chip set here.
And right now we need to take the pad; we deliver with the aqua-graphics. Be sure to take off all sort of blue, plastic and the white plastic, that's very important. Otherwise you don't cool anything. We need to mount the pad on the voltage regulator slots. So, for this just take the pads and the scissor and make the right length. One side is a little bit sticky. So take this one to mount it. When you look at the graphic card cooler don't forget these voltage regulator lose. Some people only take this one but you also need to cool these they are here.
Take another piece, right now you can take the cooler and the good thing is we have this hole here and it fits exactly on this one. So it's very easy to position. I can't move it. Put it on the side of the table because with the PCI slot you can put it directly on the table. We take the screws. Close the screws around the GPU. And then the screw. And this screw just go through the pad. So right now we finished the graphic card with a water cooler made my aqua-computer. You can also buy this one completely designed, completely ready. This is going0 just for few bucks more for guarantee and mounting, service.
If you buy a used one and someone tells you it's an original aqua-computer with guarantee it's a manufactured guarantee by the way of Club 3D and they support us here. And you have a small sticker going with one screw. So this one offers you a card originally with manufactured guaranteed by aqua-computer. There is an aqua-computer sticker right across the screw. We will apply this here later. I hope you enjoyed this tutorial. We will see you again in the next tutorial. Hope you had fun with aqua-computer-berlin.com and modmymachine.com. See you soon on YouTube. Bye.
Transcription by:
Scribe4you Transcription Services