How to Overhaul a TIME Pedal

This is a time ATAC, I am just trying to get the dirt out of here, get in there, and as the Snap Ring, with two little holes for the Snap Ring, so now I need to squeeze those together. Now right now, see the Snap Ring pliers are set when you squeeze them to pull apart, so that's for an external Snap Ring. For internal Snap Ring you need to switch it the other way, and you can have straight ones, an angled ones. We will just try the angled ones. Push those that way and now it moves internally.

Grab on to this. So this is the time system. It's a cartridge bearing. This end has a pretty good seal that prevents anything from getting out from the outside. Down in here, there is a cartridge needle bearing. So you pop that Snap Ring off and you can get that bearing off. But I am just going to flatter little more grease on this to go into the needle bearing, and drop it back in there. I am going to put this back on internal now. Okay. Here we go, and it's time.


Transcription by: Scribe4you Transcription Services