Hi, I'm Mat from eSpares and in this video I'll be showing you how to replace the inlet and outlet connectors, or covers as Karcher call them, on this 3 Series.
Now to get to these parts, you'll need to remove the casing on this machine. To do this you'll need to get a Torx head screw set, which is available to buy on the eSpares website. Once the casing is removed, pop it to one side, and inside you'll see the inlet cover which connects to your garden hose and the outlet cover which connects to your high pressure hose and handgun.
We'll start with the inlet cover. To replace this, simply remove the metal C-clip from underneath with a screwdriver. So the cover slides out like so. This cover is sold in two parts, but for some models, it comes as one complete part. It comes complete with seals and if you buy the cover nearest to the control head you also get the replacement inlet valve.
The inlet valve is removed using tweezers and the replacement simply slots into place.
The outlet cover is removed in exactly the same way. Simply loosen the metal C-clip and release the outlet cover like so. Again it comes complete with seals and there's no valves inside to worry about.
So the new parts go on exactly how the old ones came off. Once the machine is reassembled, Karcher do recommend to bleed the system to get rid of any air left in there. Just connect the garden hose to your inlet cover, run the hose for 2 or 3 minutes with the power off.
As always, all spares and accessories are available at the eSpares website. Thanks for watching.
Transcription by:
Scribe4you Transcription Services