Hi, I'm Mat from eSpares. Now replacing a gun and hose on your Karcher pressure washer is really simple but there are different types of guns and hoses available, so to find the right one for your machine, it is essential you have the right information.
All Karchers have the model numbers on the front. The 2 here shows me that this is a 2 Series pressure washer. This is a 3 Series, this one is a 4 Series and so on. For full product information, this can be found on a silver data plate on the chassis of your machine. Here we have the model number and here is the full 7 digit product number.
So here we have the four most common types of hose and handgun fittings available. The first one we have here uses the C-clip system where the hose simply fits into the base like so. The second one is similar, again using the C-clip system, this time in front of the trigger, slotting it into place and securing it. The third one is different and this one is a sealed unit and if you need to remove the hose, you'll need to unscrew these screws and the hose comes away. The last one we have here is a lot simpler. It uses the quick connect system, note simply locks in, and comes out like so.
Now the last version here uses a different hose fitting from the previous three. So again, make sure you've got all your model details before selecting the correct hose and gun. As always, these spares are available at the eSpares.co.uk website. Thank you for watching.
Transcription by:
Scribe4you Transcription Services