Male Speaker: Well, I have the tattoo machine and I have my tube and my needle. What I'm going to show you is how to set this machine up. I don't have any gloves or I don't have any tattoo or anything like this, I mean this is just a tutorial. Right here, I'm using a bigger mag needle and that too obviously, it's really, really big, but I'm going to use this to emphasize how to put it in and where and how we should lay.
Okay. First off, let's get this guy up basically in here you just basically in here, just go through this area here loosen this up. It goes in, this O loop or circle will go into the nipple, but make sure that after you put it in that's pretty sturdy and you can see it's pretty sturdy. But this is the one I wanted to emphasize on. Right here, you see the needle. The needle bar should be on the top like so, and the needle should be on the bottom. When you are lining it up to the tip of the needle, it should be flat.
So here is the tool and the needle, it should be flat like this together like flat. And that's very, very important. Once that's done, you can lock in and replace. Get your rubber band, hold the needle back so it won't shake or wobble. And that's it. Just get your clip and start tattooing and that's the basic set up. Obviously, you won't be using a big tube like this big needles or anything like this, but like I said this is just for, just for the tutorial. There you go. An Element Tattoo Supply Tattoo machine.
Transcription by:
Scribe4you Transcription Services