Hello, my name is Dawn Anderson and I'm showing you how to sew by hand. Right now, let's get started on the running stitch. The running stitch is the most basic of all hand sewing stitches. It's used for a seams, for basting and for hand gathering.
To begin, cut approximately 18 inches of thread. You will thread your hand sewing needle on one end and tie a small knot in the opposite end. Begin on one side of your fabric, take up a small amount of fabric on your needle and then pull the needle and the thread through. To take your next stitch, move forward just a bit. Again, take up a small amount on your needle and pull the thread through. You want to pull your thread snug, not overly tight, so it puckers the surface of your fabric. Put the running stitch, you can just continue on in a straight line. Take up about the same amount of fabric on each stitch, so that running stitch can be used for sewing in temporary seams. If you’d maybe are working on a garment and you don't want to put the machine stitching in it, then you can do a test fitting with just your basted seams.
You can also use it for hand gathering, which I’ll show you. Once you have your running stitch in, if you wanted to gather it, you would then tighten up the fabric and it would make the gathers, but for now were just going to leave it flat. The smaller the stitch length, the stronger the seam, so this would actually -- I would consider a basting seam. Once you get to approximately where you would like to finish sewing, go ahead and tie a knot in your work. I’d like my knots to stay right on the surface of the fabric, put your thumb there, pull it tight and cut your thread. That's how you sew the running stitch.
Now, lets move on to sewing the backstitch.
Transcription by:
Scribe4you Transcription Services