How to Tie Bowline Knot

A bowline is use in the case where you need to fix loop around an object. A fixed loop unlike a slip knot does not move. So to tie bow line I start of with my slip knot and take the end of my rope and I go underneath through the loop of my slip knot and then grab onto the body of the rope and then cinch it tight. And you should hear a pop and that’s where I have my fixed loop.

One use of a bowline is to tie a fixed loop around an object. It could be for a shelter, a line, or even to rappel off of. Normally with the rappel you would have a sling in a carabiner. It is much safer but in emergency situation if the only you have is the rope you can just tie a rope around a good anchor. Make sure your anchor is really solid. We’ll talk about anchors later.

So first thing I'm going to do is tie my slip knot then I take the running end of the rope, go around my object and then that end comes through the loop just like before. Grab onto the end and the inside of the loop and just pull tight until it snaps. Make sure you have two to three inches of an end leftover.


Transcription by: Scribe4you Transcription Services