Slame: Hi. I am back with ModMyMachine time as always, modmymachine.com and aqua-computer-berlin-de present today a request of a user's how to tube a system, so how to blade down the hosing, I will show you in a system. Let's go over, I'll show you the details and then we go on. So we got a couplex pro inside, we got a twinplex chipset, we got a voltage regulator block, we got an Aquagrafx G84 and 8900 GTX, we got a pump with a reservoir and we got an Aquadrive, so and the radiator up there already connected with the tubes. So I'll show you how to connect the rest and there we go.
So first of all, it's not important in which direction you do it and if you go first on the CPU, second to this chipset, third to the Aquagrafx. You can also go there first, there first, whatever you want, it doesn't matter because the temperature going in at the radiator and out is approximately a difference between one and a two degrees, so no matter where you start, no matter where you stop. The only important thing is that the reservoir is always just in front of the pump. In this case, it doesn't matter because we have it directly connected. Another important thing if you use such a jet cooler, you have to go in, in the middle, okay. Always connect the coolers like some thing is up, so the air can go away.
So let's start, let's see what's the easiest way. I think we start here, going from the radiator directly into the Aquadrive, cut it clean. There we go, starting here. That's quite easy. Then we go to the voltage regulator block. Take an approximate size. For those who don't know how much to bend, it's like this. So let's see if this is enough to get here, yes, this is fantastic, great. So other direction; from the radiator, I will go down to the reservoir. There we are. From the graphic card into the chipset, so that's fine, little -- do some cutting and some more; perfect.
Then we will go from the chipset all the way back over there into the chipset. With one elbow, we will go -- or do we need one, over to the pump, even shorter, there we are, that was it. As I mentioned, it doesn't matter which direction you do, the only thing is go with the pressure directly from the pump into the middle of the jet cooler over to the chipset, over to the graphic cards, to the voltage regulator, over to the aqua drive, hard disk drive cooler and into the radiator, from the radiator back into the reservoir. That's it, hope you like it. That was another tutorial with aqua-computer-berlin-de and modmymachine.com, hope you liked it. See you soon on YouTube.
Transcription by:
Scribe4you Transcription Services