Hello! Everyone this is Crazy Fish Farmer here, I just wanted to show you something I have been playing with again. I have got a little ceramic resistor of some sort that come of piece of an electronics that basically uses up about less that an amp, but it almost boils the gas, you can see bubbles coming off of it. And what I have got is a little tube in there injecting air into the bottom to basically just create a lot of turbulence in their, to turn the gas to a vapor.
And yes this is a ticking time bomb because my design is all flowed I am loosing gas out the top and all that. But I just wanted to show you the concept; hopefully you won't get to see it blow up. Alright I am going to go ahead and turn it on; hopefully we don't get no sparks. Oops! I got to hook the air hose back up, hold down one second. Here we go, that's another problem once I shut everything down, there is so much pressure in the hose that it wants to pull the gas out or push the gas out through the air hose once I shut it off.
So that's something I have got to work out. But here it goes. And its just basically there is a little bit of water mixed in there, just from the bubbles that I have got here. So you can see a little bit of gas particle moving around in there or water particles rather. And that's what you see and it's just little bit of water. But I am going to bring you on into the Winnebago, it's a little windy out here today. So and there is the rig I have got setup and what's has happening is I am loosing a little bit of gas through my connections here just because the pressure that I have been building up in it.
But I will show you what I have got, I have got the lead running down through here up in to the Winnebago window, just to knock wind off, and there you. I can't get this torch adjusted right to get take this flame, I do have my cutting torch out there, I am going to pull it out and see if I can rig it on one of these hoses to actually play with this, but you can see we were by edge of taking that gas and putting air through it, vow! Lot of gas been blowing out here, I guess I just can't quite regulate it right and make it stable.
Well there you go, getting closer, just got to work on my design little bit and then work on a little bit more and then hopefully get it into the van and actually I probably start with a smaller motor like a little moped of something, try to get a moped to run on this and then, there you go, have fun.
Transcription by:
Scribe4you Transcription Services