How to Use the Line Board For Crease Repair

Male Speaker: Bend in it and he is going to take out and show me the tip of the whale tail. Mike: What I am going to do is I am going to go here, lock this edge into the brace. I will use this tip and I will work it this way. I am going to close the gap of the line. Male Speaker: On that shadow. Now we are looking at the line. Mike: You've got to dig this in the line. Male Speaker: You've got to dig this in the line. You've got to dig this in the brace, use this edge, the opposite edge towards. Male Speaker: Mike is going to look at plates in tool inside the door. Bearing in mind we are working on a brace. I am using the whale tail and you could see to the right-hand side, just right-hand side of the middle of the screen where that line is nipping. Mike is gradually working across nipping in that line, working from the middle of the screen, just across from the middle of the screen towards the left, at center of the screen. You can see that line pinching as he is going. Mike: This is the first pass. Male Speaker: This is the first pass running through that crease. We are right in the center of the screen and the fork will as you notice that they are moving from the right-hand side of center to the left of center of the screen. You can still see the fault in between the pushes. I will ask Mike to stop pushing for a second and I am going to zoom very carefully into the fork. Now the fork appears to be a bit bigger and in center of screen. I will come back out again with the camera and you see the fork and you also see to the left of the fork in the center of the screen where it starts to fork again now with a bit more of a uniform white hallow, almost like sand around the outside of the long lake and Mike is now going to put the tool back in and continue working across. Again, we have just repositioned now so the fork is just right of center. Working towards the center and you can see clearly between each push that the center of the lake with the sand around the outside is becoming smaller and it's almost now gone. Right in the center you can see the push and again I will ask Mike to stop so we can just survey what's going on by moving the camera. Mike: Now we just need to adjust the board. Male Speaker: backwards and forward and as Mike was saying --