No text or picture Add-ons were added yet. How sad!
No Links were listed yet. Go ahead and share!
Hey everybody! Guy Rieffer again and I am here to teach you how to make a Bic Writer into a flame thrower. First you need a Bic Writer, it has to be big and then you also need to make sure it has got the point adjuster on it!
First thing is first, you have to get rid of this metal cap that is on it, so you just need to take it off and it does come off, just take some time.
Anyway, once you have that, you are done! Turn it all the way up to a tight setting, okay and then you push up on the Bic Writer once this metal thing is off. Push up and then you have got to push it back and down! Like the low setting, but again make sure the writer is off the track. There is a little gear in there. You have to “off” the gear and then you turn it to the left to its lowest form, put it back on the gear and then turn it up again. You can do that as many times as you want. The higher you do that there, the bigger it is, however, be careful because the bigger the flame gets, or the higher likelihood that you could have an explosion on your hands and blow your hand off.
So, be careful and that is how you make a flame thrower! Be safe!
Transcription by:
Scribe4you Transcription Services