(Background Music)
Man 1: How do we clean a rudder?
Man 2: The best way to clean a breaker is of rubbing alcohol.
Is anything like a lubricant, anything else that goes on there is going to cause a lot of bubbles with the break caliber being rub on floor for problem. They will just slip through there a lot.
So what you want to do is use rubbing alcohol in there with some kind of really clean drier bag. And then from there, it going to take off a lot of dirt, and that is going to eliminate that real thin rubbing that you here to apply.
Once we put that on the roader,
Clean that off a little bit. I am going to see if there off a lot dark down there.
A lot of that is the surface of the break pans, turn it a little bit. So once you ham on this break, it actually will improve after a little of this because that break pan is going to kind of wearing and stuff like that.
So now, you will see as we spin back, you do not have any roader run the ball.
(Music Playing)
When we use a little bit masters come back, so as the rubber did not have all of that. Got little route here,
I think that the rubbing are here is all on that blank.
(Laughing)
Now we got enough.
Transcription by:
Scribe4you Transcription Services