Aright, now, today, I am going to show you how to make fuse jumping jacks. Now, these are made with very easy to get materials. All you need is fuse, I got this from cannonfuse.com or you can get it from skylighter.com, ebay.com and pyrocreations.com. Also, you are going to need one inch wide masking tape, it doesn't matter what color it is, I just have blue right now. And also scissors. I'd rather use razor blades to cut the fuse so you don't squish the fuse when you close the scissors. But if you cut them with scissors make sure you put the fuse right there, all the way in and then cut it, don't use the tip, alright.
Now to make these, you want to cut six small pieces of fuse and one, one-and-a-half inch long piece of fuse. Now what you are going to do is lay them down, just like this, the one inch pieces of fuse, right next to each other. It doesn't matter how long the masking tape is, just have a reasonable length and then you are going to want to take the one-and-a-half inch long fuse and just put it at the end right here.
Alright, now for this, I am going to put the camera underneath my chin to show you how to do this, alright. Now to fold it up what you want to do is take the tape and then just roll it up.
Once you got there, it looks like a little firecracker but it's really not, both ends should have fuse in it, and here you go, you just light and it will spin around really fast. Now let's go outside and test it.
Right now we are outside, I am just walking out through the road, so you can test this out, I've got the jumping jack fuse in here and I have got my lighter, so let's try this.
Usually I throw them up in the air after I light them. It's a lot of fun to do that, to watch it spin in the air but this one, I am just going to toss it. Alright so, what's I am going to do is light it. And they spin.
Transcription by:
Scribe4you Transcription Services