How to replace brass fill vavle

We are going to go here; we are going to go with the brass valve cock.

The refill too for the brass valve cock which is screws it in. There is only one spot I can go. Now this is going to be the trip lever for the float—the ball float is going on one end in and as the water rises it will cut the water to ball cock off, therefore stopping the tank from filling or over flowing.

Now the ball float, it just screws right on to the other end. Of course, you are going to need two sets of hands to do this while holding the ball cock up top in the tank and screwing the knot on from the bottom part.

Now, let us tighten it our pliers.


Transcription by: Scribe4you Transcription Services