Alright Folks, this look video is all about buying the right sleep mat. And you probably think why it is a mat or a sleek mat. So at the end of the day, if you like spinning, turning and you like being out to move the record smoothly, you have to have a good sleep mat okay especially spin backs. There is nothing wrong worst in having this sticky sleep mat, no point. Alright? Do not go in the shops and buy the best sleep mats that looks fantastic because believe me that probably not good alright?
You need something does the job correctly. General sleep mats will be about 1mm to 1/12 mm stick. I think I have got sometime here, hold on owe just have a quick look. I think this, there is a couple here, that one, yes. Right. Okay, so here we go I have some sleep mats. Now then, first probably might have sleep mats is casually what happens is the hole gage is too big. If the hole is too big, and it is on the spindle and it wobbles and its time to get a new one, okay?
What well do is we have one here, the hole is not really to be that big. This is about a millimeter thick. Whatever the thickness make sure add in another video, make sure that the arm rest on where the balance is at back make sure its just off camera vat is at the right heart, very important so put the record on we’ll try this one and we’ll see what happens. And again, okay pretty good right? No but we are about saving money all the way.
How about this? Piece of plastic okay, vat is a piece of plastic. You can fold that in your pocket, okay? Take it out, what you do is you get a nice piece of plastic, you measure around directly, and this one is slightly that we should bit too big. Co I did not take much time in cutting it. Now then, the actual spin back may do not be as fast or maybe on slot if positive whatever. But this cost zero, nothing alright? Have it listen.. Now I would even say that was a lot better. Okay? So how much is a better sleep mats costs 20 could that is three for change over here? Now the things that you should know use a sleep mats, thin foil do not use thin foil because it is not a good idea because you will scratch directly.
Also it is not a very good idea to use any formed plate. Because the thing is there is no hole in the middle and of course you a slight off crack. And of course very important do not use a hair brush. Practice and enjoy.
Transcription by:
Scribe4you Transcription Services