13 hours in line for Apples Iphone, powerbookmedic.com has gone ahead and disassembled the Iphone for your viewing pleasure.
Now this is just a general over view of disassembly process. For a complete guide, you can go to powerbookmedic.com, font size Iphone.
Now at the back of the Iphone, you will see this rubber plate. This rubber plate can simply be pride off with thin tools such as a potty knife.
Once that pieces off, there is going to be two screws holding down the back case. This is going to be right in this location. With those two screws remove, you can use your flat tool deprive of that case off, pry off to the top case, to the top case right here.
Basically at that point, the sim card is going to be able to be removed and you can flip over the back case. The head phone board was connected to the logic board. You will disconnect this by putting a flat head tool underneath the cable and disconnecting it.
That point, you are going to have a frame held in by three screws in either side. Just simply remove those screws and the frame will come off.
You are going to have your microphone right here in this location. You can simply disconnect it from the logic board and remove it. There is going to be three screws on the logic board, one on the top, 2 longer ones on the bottom.
Once you remove those, is going to give access to cables underneath the logic board which you can simply pry, pry off with a flat head tool. The batteries simply pries up like so. It is only held on in place by a thin adhesive.
And that in general is an over view of the Iphone disassembly.
Transcription by:
Scribe4you Transcription Services