How to mod H2 on Xbox 360

How To Mod H2 on a 360. What You Need A 360 Hard Drive T6 & T10 torx Screw Driver Phillips Screw Driver (to open the PC) SATA serial cable SATA power cable A PC What to do. Okay, here are the four T6 screws, underneath the Xbox 360 hard drive, one under the Microsoft sticker and the other three are the inch quarter. Okay, once you have moved the screws, you should be able to pop, and hard drive is out. It will look something like this, with 4 T6 screws, in here, here, here and here. Okay you remove these four screws, just pop this up right here, then you have your hard drive, just slide it out. Okay, now what you want to do right here is, your hard drive is in there, let's slide it out. It's right here, it's kind of remove your fingers underneath like this and slide it out, take it out that way. Then this right here, SATA connected, just pop it,like how it should come right off and slide the hard drive the rest of the way out, looks something like this. Okay, it's located right here is a serial cord which transfers the data and rest here is the power cord. Now you have to open the computer, okay, now that our computer is opened, you see this red cord here, it's another SATA serial cord, goes to the hub which is down here and the hub is right there, and then to the power cord I just took the power thing off of the scribe right here. Now as I do attach the power cord, connect here, the power slot on the Xbox 360 hard drive, like that, and then so as the serial cord, Okay. Now we have to hook that to the computer, everything is hooked to the computer, all you do, turn the computer on.