Steve Watson: If you have room in your house and like to add a little character too maybe
it look nicer. Adding some wood beam just like is a good way to do it.
Now you can buy real wood beams or you can use the full wood beams
that we have here, the much lighter much less expensive. To do this
yourself you are going to need some tools, you are going to need a tape
measure, a chalk line, an angle finder, a level, and a chop saw, a hand saw
and a drill. The steps are pretty easy, you can get this done. First choose
your design then place your order. We’ve chosen a rock sound wood look
and we place if you want with the company and it looks just like wood.
Once you’ve done that decide your layout, we decided to go over the
existing lights. Once you choose your layout then run the chalk lines so
that you know that you’re completely straight. After you run your chalk
line you can apply your mounting blocks to ceiling and to give you
something to screw into then you find your angle using your angle finder.
Then you market and you make the coat with your hand saw. Put them in
the place and make sure it fits if it does fit and you simply screwed each of
the wood beams into your mounting block. This entire process can take
you four to five hours or a couple of days depending on how fast you are
going to work. And once your finish you’ve change the entire look of your
room and you can be much happier with it and you’ve done it yourself. If
you like to try this click on go lists and it will send your supplies lists
straight to your cell phone.
Transcription by:
Scribe4you Transcription Services