How to make a More Powerful Camera Teaser?
First remove the outer wrapping. Next, remove the outer plastic case. Locate the capacitor. It looks like a battery with 2 wires coming out of the top. Discharge the capacitor with the screwdriver by touching it to the 2 wires at the same time.
Warning: It may spark. This is normal.
Next, take a 2 paper clips and hook them around the 2 wires of the capacitor. Make sure they are not touching. Use a rubber band or electric tape to secure the paper clips.
Now, take the other camera apart, locate the capacitor, and discharge it. Instead of hooking paper clips to the wires, cut them, leaving as much of the wires intact as possible.
Twist the wires of the second capacitor onto the corresponding wires (paperclips) of the first capacitor. Make sure you wire it so that the grey stripes on the side of the capacitor match.
Press and hold the flash button. Once it is fully charged, touch the prongs to something conductive, like metal. Here it is again with only one capacitor.
[Demonstration]
One capacitor
[Demonstration]
Two capacitors
You can add as many capacitors as you want. The more you add, the longer it takes to charge.
Transcription by:
Scribe4you Transcription Services