We are going to show you how do you power any TV with a triple A battery. You only need 3 items to get started.
You need a triple A of course. Some duck tapes and some RCA Audio cables. You can probably find this anywhere.
You want to go ahead and break off the prom that sticks out of the end of the cable, and after you have done that, you want to go ahead and spread out the metal casing.
You are going to hook the battery around that casing, and you can go ahead and you need to seal it around with some duck tape. Just make sure it is making contact with the cable.
Then, go ahead and do that for the other side as well.
Fish that both sides duck tape with the battery in the middle.
Next, go ahead and take the plug to a device you want to do. We are going to be doing on TV obviously.
Plug in the other end of the cable into the tube metal proms or the metal holds round.
And, you should be all set.
Make sure you have the right cord for the device you want to plug in. Right here, we are going to be doing the TV.
And, here we have the battery.
Let us go ahead and give it a shot and see what happens.
And, there we go. Now keep in mind that this would not last too long because this battery simple just cannot hold large enough charge to power such a large device.
But, there you go.
Now, you can power anything you want with a triple A battery.
Transcription by:
Scribe4you Transcription Services