No text or picture Add-ons were added yet. How sad!
AVTECH and PVR removal of body part 1.
A loose screen has caused two screws in the camera to get lose and we are going to remove the whole camera. These two screws do not tighten up the screen. Locate lower notch and start to peel the sticker by going around the lining.
Glue is strong for reapplication, use a heat lamp to put back on. Three screws, one large between joystick and menu mode and below air bud. Those are two small screws. Between mouse and button will be the hardest screw to get out. Do not lose screws, place aside when off. Squeeze around and work your fingers up to the top of the camera and the back cover plate will gently come right off with these.
Place cover on the side, be careful not to lose the LCD lock and arrow, remember how they came off for replacement. Take camera strap off and pry the lower button with the tool and work your way around with another tool as well. This is a harder sticker than the back one. Be careful not to lose the red sensor, it will fall out.
Behind cover are two silver screws take out and place aside. Looking at the camera, we are going to find out how to get to the next step of taking the whole camera apart. Please proceed to video number two and check out part three for completion of the whole camera, thank you.
Transcription by:
Scribe4you Transcription Services