No Links were listed yet. Go ahead and share!
How to make a shaping room out of your garage
Supplies:
1” x 8” x 10” [2]
1” x 2” x 10” [2]
Extension Cord
Power Strips
Elbow Joints [6]
Drop Cloth
Florescent Lightbulbs [8]
Light Fixtures [4]
Shaping Block
Power Drill
Tape Measure
Step 1: Make lines for shelf height (Tip: Optimum Height)
Step 2: Drill elbows into [2] 1” x 8” x 10” shelves. Use wood screws.
Step 3: Mount shelves on the wall in relations to your lines. A level would come in hand. Double Check height. Teamwork is good.
Step 4: Mount 1” x 2” x 10” underneath shelves (used to control level of lighting) Start with a pilot drill. Finish with wood screws (if you have s shitty drill).
Step 5: Mount light fixtures to wall, Mount enclosure first, then add electrical unit.
Step 6: Add florescent light bulbs to fixtures. Make sure to get the right size bulb for the fixture.
Step 7: Set up power to lights. This will be different everywhere depending on the location of the electrical outlets. Mount power strips.
Step 8: Hang drop cloth to contain debris from foam and dust particles. Staple away. Duct tape works in a pinch.
Step 9: Shred some foam.
Transcription by:
Scribe4you Transcription Services