(Music Playing)
Now, I am already spends about I do not know may be 20 minutes standing this leg and I have got two of these to do. So, I need call of something that is little bit faster than just there by hand and trying to clean it up. That going to take a long time to a certainly as possible and lot of your probably we are going to have to do something like someday, and there is really not a whole lot you can do if you do not have you know certain tools just the way it is.
In this case, since it is a turn leg there still marks on here. I actually could check this out on my leg and I do not have a really big leg it is thus, a inexpensive jet many live but in a case like is more that adequate. I could just check it backup until lays and very gentle return and kind like I did with the router bed and kiss the surface to remove that material if you do not do that you know you can still get the job done but it probably would not be as clean especially where you have areas of un-grain.
It is really hard to get that stain out of there that and grain just pulls the stain pulls the finish and it is really, really, penetrating depth. So, it is very difficult to sand all that away. So, we are actually going to hand take a little bit of time to try and sort of return this but be very gentle I do not want to change any dimensions and certainly do not want to do any damage I want to make this with better than it look before. So, that the certainly what we are going to do.
So, I am going to jump in here and probably we will be going to use an array of tools starting with my super float bull gauge turning tools, she is there is still of time of them but I actually when you use turning for to do all the work that I do. I am not really a huger turner I enjoy it once in while it is a nice break from the norm my wife likes to turn a lot so maybe visual doing up and should for you later. But we are not getting into the details of the actual this time we are going save that for an actual turning episode.
I do not even think I was going to have to do this but it is like this is taking a little bit too long so we are looking to save time were we can. I want officially announce that if my wife does not clean up this garage so creep from this area. Let us say by the week end I think of officially going to freak out. So, I have been looking for that on my blog. Thanks.
(Demonstration)
So, after about 5 minutes of turning and five minutes of sanding we have pretty much got a piece such a ready for the next step maybe a little bit of cleaning up to do here and there. But it looks pretty good. I got another time saving and finger saving tip here for you.
I do not know I shown this before with these are just a little profile sanding molds is actually they are made of rubber the only cost a few box for a pack and there is you know maybe 4-5 different sizes and you have both concave and convex curve shade units here.
This actually you just wrap them in sand paper and then you could pretty much comfort t to any profile you have them to me to sand we also got these skinny fully answer which are great for getting into this really take here like this. So, obviously, to get through the rest of this project all the pieces that are left actually have actually have a nice little spot that this are perfect for.
Now, for just few box it is really good investment to save your fingers after full day of using sand paper. Like this should be amaze to out saw your fingers are going to get. So, spend the money it is worth and if now I have the done the bulk poly urethane and sting removal it is time do to a final standing probably of 280 grip but before I even do that I am looking around and my job is quit amaze. I am sure you guys have confronted to this rose times and you get in to this point of project and everything is all over the place.
So, a wise man once told me that if ever time you come when you shop and take just ten things pick any ten things and put it away you, you will noticed a huge difference and a climbing use to your shop and then also of course that makes the shop little bit safe from the working. So, well first we are going to be paneling around my wife is not here to move the camera so bear with me it will bothers you. Tune into another channel. Okay, this is much in. So, I will put time things away and we will see if this actually works
Transcription by:
Scribe4you Transcription Services